COPYRIGHT WARNING:
All pictures and texts in this web page are the property of nomaallim.com. Any use of any part of those contents without the written consent of nomaallim.com shall be subject to legal procedures as per international and local laws in the concerned country. Using the name "nomaallim" or "nomaallim com" or "nomaallim.com" in the text describing the unauthorized copied content shall not constitute an exception and shall be sanctioned in accordance to the effective laws and proceedings.
All pictures and texts in this web page are the property of nomaallim.com. Any use of any part of those contents without the written consent of nomaallim.com shall be subject to legal procedures as per international and local laws in the concerned country. Using the name "nomaallim" or "nomaallim com" or "nomaallim.com" in the text describing the unauthorized copied content shall not constitute an exception and shall be sanctioned in accordance to the effective laws and proceedings.
BEFORE YOU START
|
|
DISCLAIMER:
Our pictorials are of informative nature and do illustrate works carried out by ourselves at our own premises for our own use and satisfaction.
Readers who envisage to carry out similar works inspired by the below method shall do this at their own risks and liability.
Our pictorials are of informative nature and do illustrate works carried out by ourselves at our own premises for our own use and satisfaction.
Readers who envisage to carry out similar works inspired by the below method shall do this at their own risks and liability.
Reaching the foglight on a Citroën C5 Aircross
Insert your trim removal tool on the most angular part of the bumper around the foglight, and pull out gently and perpendicularly to the bumper the plastic part that houses the foglight.
Both platic or steel trim removal tools are suitable.
Both platic or steel trim removal tools are suitable.
This completely uncovers the foglight of the Citroën C5 Aircross:
|
|
|
Replacing the entire foglight or its lamp (bulb)
The Citroën C5 Aircross foglight is held to the bumper by the means of two Torx screws.
Use any Torx tool in your possession to unscrew them and take out the foglight.
Use any Torx tool in your possession to unscrew them and take out the foglight.
Disconnect the electrical connector from the H11 halogen bulb and replace it, or replace the entire foglight if that was the purpose of your intervention. That's it!
|
|
|
![](http://ae01.alicdn.com/kf/S0a2b047be3734797a918e819cc86d6a5T.jpg_140x140.jpg")
![](http://ae01.alicdn.com/kf/Sf58c738951e544adb758aa4a52393c32P.jpg_140x140.jpg")
![](http://ae01.alicdn.com/kf/Sb44d03da1db04a5faf939b21dc12132al.jpg_140x140.jpg")
![](http://ae01.alicdn.com/kf/S7d70d4bde9274bdd925d128cc4467732K.jpg_140x140.jpg")
![](http://ae01.alicdn.com/kf/S367553c1639042e7a4e0a9bb06136310j.jpg_140x140.jpg")