COPYRIGHT WARNING:
All pictures and texts in this web page are the property of nomaallim.com. Any use of any part of those contents without the written consent of nomaallim.com shall be subject to legal procedures as per international and local laws in the concerned country. Using the name "nomaallim" or "nomaallim com" or "nomaallim.com" in the text describing the unauthorized copied content shall not constitute an exception and shall be sanctioned in accordance to the effective laws and proceedings.
All pictures and texts in this web page are the property of nomaallim.com. Any use of any part of those contents without the written consent of nomaallim.com shall be subject to legal procedures as per international and local laws in the concerned country. Using the name "nomaallim" or "nomaallim com" or "nomaallim.com" in the text describing the unauthorized copied content shall not constitute an exception and shall be sanctioned in accordance to the effective laws and proceedings.
BEFORE YOU START
|
NOTE: Wiper of a Dacia / Renault Duster is shown here but the replacement of rear wiper blades is identical or similar on almost all vehicles of all makes and models.
|
DISCLAIMER:
Our pictorials are of informative nature and do illustrate works carried out by ourselves at our own premises for our own use and satisfaction.
Readers who envisage to carry out similar works inspired by the below method shall do this at their own risks and liability.
Our pictorials are of informative nature and do illustrate works carried out by ourselves at our own premises for our own use and satisfaction.
Readers who envisage to carry out similar works inspired by the below method shall do this at their own risks and liability.
Removing the wiper blade rubber strip
Open the wiper arm and gently pull out the rubber strip.
You can bend it a little to take the strip out of its first holding point, then slide is out of the remaining two holders.
Watch well how the steel blades are fitted inside one of the grooves of the rubber strips since you need to refit them the same way in the new blade. See below for re-assembly.
You can bend it a little to take the strip out of its first holding point, then slide is out of the remaining two holders.
Watch well how the steel blades are fitted inside one of the grooves of the rubber strips since you need to refit them the same way in the new blade. See below for re-assembly.
Refitting a new rear wiper blade rubber strip
|
Buy universal wiper blades rubber strips that fit to any vehicle and take advantage of the low price.
Such strips can be cut to the required length and are usually supplied in lenghtes between 60 and 70 cm. |
|
![](http://ae01.alicdn.com/kf/S3485a961da164ba5a37415ec82468f5bY.jpg_140x140.jpg") |
![](http://ae01.alicdn.com/kf/S9201953f4cf8418a93f55e3c94d97afaO.jpg_140x140.jpg") |
Cut the rubber strip to the same length of the worn one and refit the metal blades in the first groove (right).
Firmly hold the assembled rear wiper blade with your fingers while refitting it into the rear wiper arm.
Make sure the new blade is well anchored and that it cannot move out of its intended holders.
That's it!
Make sure the new blade is well anchored and that it cannot move out of its intended holders.
That's it!
|
|
![](http://ae01.alicdn.com/kf/S2b85cc1c4cb9466b82eb6d49495317fbX.jpg_140x140.jpg")
![](http://ae01.alicdn.com/kf/Sb8b579f57ec34ad7ace7f78e9e592741B.jpg_140x140.jpg")
![](http://ae01.alicdn.com/kf/Scad35146805048a7a833d8aae1cd6fde6.jpg_140x140.jpg")
![](http://ae01.alicdn.com/kf/S4506c6aa88fc42efa1c3d577ab1e436dY.jpg_140x140.jpg")
![](http://ae01.alicdn.com/kf/S4ede4726b6984c429a28e8361094d3ffe.jpg_140x140.jpg")
![](http://ae01.alicdn.com/kf/S5bafa664c04c4882ab69025a5a12b3d8G.jpg_140x140.jpg")