COPYRIGHT WARNING:
All pictures and texts in this web page are the property of nomaallim.com. Any use of any part of those contents without the written consent of nomaallim.com shall be subject to legal procedures as per international and local laws in the concerned country. Using the name "nomaallim" or "nomaallim com" or "nomaallim.com" in the text describing the unauthorized copied content shall not constitute an exception and shall be sanctioned in accordance to the effective laws and proceedings.
All pictures and texts in this web page are the property of nomaallim.com. Any use of any part of those contents without the written consent of nomaallim.com shall be subject to legal procedures as per international and local laws in the concerned country. Using the name "nomaallim" or "nomaallim com" or "nomaallim.com" in the text describing the unauthorized copied content shall not constitute an exception and shall be sanctioned in accordance to the effective laws and proceedings.
BEFORE YOU START
|
|
DISCLAIMER:
Our pictorials are of informative nature and do illustrate works carried out by ourselves at our own premises for our own use and satisfaction.
Readers who envisage to carry out similar works inspired by the below method shall do this at their own risks and liability.
Our pictorials are of informative nature and do illustrate works carried out by ourselves at our own premises for our own use and satisfaction.
Readers who envisage to carry out similar works inspired by the below method shall do this at their own risks and liability.
Fitting a new brake handle to the handlebar of your bike
Use an Allen key to unscrew the bolt that holds the brake handle to the steering bar and insert it in the bar while keeping it lose for now:
Check the provided brake cable nut vs. the one existing at the end of your bicycle brake cable.
Just take the new one out if it has the same diameter than the existing one, or else, replace the existing one with this one.
See below for the replacement method.
Just take the new one out if it has the same diameter than the existing one, or else, replace the existing one with this one.
See below for the replacement method.
Pull the brake cable out in order to free and remove the cylinder shaped nut and its counter-nut (ring shaped) as shown:
Fit the end of the bicycle brake cable into its seat and let it pass though the slot of the brake lever, then fit the nuts as shown:
|
|
|
Adjusting the brake handle and brakes
Insert back the rubber grip into the handlebar to know where to fix the brake lever.
Tighten the brake handle bolt with an allen key, then proceed to the brakes pads checking and adjustment.
Tighten the brake handle bolt with an allen key, then proceed to the brakes pads checking and adjustment.
|
|
|
![](http://ae01.alicdn.com/kf/S37392a6ddada45c4b0f08e70280e66fb4.jpg_140x140.jpg")
![](http://ae01.alicdn.com/kf/Sc834ca4d0cef43b2877964a911b3355fr.jpg_140x140.jpg")
![](http://ae01.alicdn.com/kf/Se811d96c3b384e6993d5d44d23c5cef0m.jpg_140x140.jpg")
![](http://ae01.alicdn.com/kf/Hf72a11876a01425997e1c4ffd49734f4D.jpg_140x140.jpg")
![](http://ae01.alicdn.com/kf/Seb89db06f51f4cd1af51b5c82afdfa04E.jpg_140x140.jpg")
![](http://ae01.alicdn.com/kf/Sbe3105d4cc644d6bb3b4b0576db53212S.jpg_140x140.jpg")