COPYRIGHT WARNING:
All pictures and texts in this web page are the property of nomaallim.com. Any use of any part of those contents without the written consent of nomaallim.com shall be subject to legal procedures as per international and local laws in the concerned country. Using the name "nomaallim" or "nomaallim com" or "nomaallim.com" in the text describing the unauthorized copied content shall not constitute an exception and shall be sanctioned in accordance to the effective laws and proceedings.
All pictures and texts in this web page are the property of nomaallim.com. Any use of any part of those contents without the written consent of nomaallim.com shall be subject to legal procedures as per international and local laws in the concerned country. Using the name "nomaallim" or "nomaallim com" or "nomaallim.com" in the text describing the unauthorized copied content shall not constitute an exception and shall be sanctioned in accordance to the effective laws and proceedings.
BEFORE YOU START
Start by visiting our pictorials for: |
|
DISCLAIMER:
Our pictorials are of informative nature and do illustrate works carried out by ourselves at our own premises for our own use and satisfaction.
Readers who envisage to carry out similar works inspired by the below method shall do this at their own risks and liability.
Our pictorials are of informative nature and do illustrate works carried out by ourselves at our own premises for our own use and satisfaction.
Readers who envisage to carry out similar works inspired by the below method shall do this at their own risks and liability.
Removing car interior cover panels for speaker wire installation
We had shown in our previous pictorial how to run the speaker wire from the rear door to the mid-frame where the front seatbelt (seat belt) hub is.
|
![](http://ae01.alicdn.com/kf/S1ac8ae927ab44bcab1984f59801c6937w.jpg_140x140.jpg") |
![](http://ae01.alicdn.com/kf/Sed57f79660db4be08f38c73c1f346800M.jpg_140x140.jpg") |
Continue detaching with your fingers the cover panels and make sure not to use any tool to avoid damaging them.
Simply pull out the interior car panels with some force until detaching their fixing clip.
Simply lay down the speaker wire nearby the door seal.
Simply pull out the interior car panels with some force until detaching their fixing clip.
Simply lay down the speaker wire nearby the door seal.
You might need to pull away the door seal (left) for being able to remove the front vertical cover panel (middle).
Run then the speaker wire beneath the car floor carpet (right).
Run then the speaker wire beneath the car floor carpet (right).
Leave enough length for later pulling the car speaker wire through the dashboard up to the car stereo set.
|
|
Refitting car interior cover frames
Simply match the cover panel with its intended location and press firmly until you hear a "clic" sound denoting that the fixing clip on the panel caught on the other half on the chassis.
Make sure to adjust the interior frame covers with the car door seals.
Do not hesitate to use a small screwdriver for such adjustment.
Make sure to adjust the interior frame covers with the car door seals.
Do not hesitate to use a small screwdriver for such adjustment.
|
|
|
![](http://ae01.alicdn.com/kf/S5e01717220a048bf8493fca42379493fb.jpg_140x140.jpg")
![](http://ae01.alicdn.com/kf/S09ebf6bf27f642dea541438ad5a3d936i.jpg_140x140.jpg")
![](http://ae01.alicdn.com/kf/Sff6434d3ec584909a6959ba0995532d9z.jpg_140x140.jpg")